The secret behind your staying dry and fresh while riding on a motorcycle even in the hottest of days is the wind. Although this is a desirable condition, one thing which is totally undesirable to your body is the dehydration that follows. Quenching your thirst and keeping your body hydrated on the go is very crucial.
However, you can’t take off your motorcycle helmet as frequently as you need to drink fluids. So the only solution is to drink with your helmet on. How to drink with a full-face motorcycle helmet on, you ask? Well, we have the perfect set of solutions along with some tips and tricks for you.
How to Drink with a Full Face Motorcycle Helmet | Tips and Tricks
You can approach this problem of drinking from many directions, thanks to the huge amount of options to choose from. Not to make it confusing, we will present to you only the best solutions out there. You are free to use any option you prefer that’ll meet your demands.
These are bags, integrated with a flexible water pouch commonly referred to as bladder, attached to a tube that reaches your mouth. You can stop, raise your face shield and take a drink, as well as keeping it near your lips under the chin so that you can take a sip on the go. You can take other items on these bags too.
Most of the bags from Camelbak offer 2liter water capacity and it should be enough for a motorcycle rider. You can get more liter count if you want. The drink tube is routed on the right side. When you need a drink, just stop and bite on the valve to take a sip. There’s no magnetic clipping system on these.
These bags come in with 3liters of water holding capacity. The drinking tube can be accessed from both shoulder sides. But it’s recommended to keep them on the right because the bite valve can reattach to the magnetic clip. You can keep the mouthpiece near your mouth all the time or you can rest it at the clip too.
Osprey offers a wider range of bladder capacity for different purposes. They have the magnetic clipping for their tubes as well. The manufacturers claim to be very eco-friendly with the production of their backpacks. This is also a popular choice from bikers.
These are not your everyday drinking mugs. They have a long straw attached to them as well as a large handle and usually, come with a holder designed especially for the job. The holder and the mug arrangement are most of the time placed near the handle of the motorcycle.
Butler Mug Holding System
Butler provides holding brackets that are strong and flexible. The strength helps to keep the mug in its place when making sharp turns while the flexibility allows for quick retrieval of the mug when you need to drink. There is a cover at the tip of the straw of the mug. The mug holds about half a liter of water.
Frequently Asked Questions
Q: Can I use soft-drinks in my hydration packs?
Ans: Bladders of hydration packs react with different types of liquids and affect the liquid in the process. Ask your retailer for information on which types of drinks you can carry in it. However, there are special drink-powders available on the market designed specifically for hydration bladders. You may consider those.
Q: My water tastes different when I drink it from the hydration pack. Is this a problem?
Ans: Yes. Your hydration packs reservoir and delivery system are made from poor quality material. You should consult your retailer and change it to anything from Platypus, or Camelbak or Osprey.
If you are going on a short trip and you know that you’ll not require a lot of water, then butler mugs are probably the best option for you. Simply stop, raise the face-shield integrated with the helmet and drink from through the mug’s straw. It doesn’t get simpler than this. Be careful not to try this on a running motorcycle.
Nevertheless, when it comes to long motorcycle rides, the hydration packs are your go-to drinking solution. All the 3 brands mentioned above have excellent build quality for taste-less water supply. It’s a matter of personal preference and which design you may like for your full-face motorcycle helmet.