Match the helmet ridges and the curtain, take the check pads out, softly press the curtain into the chin and push to fit on all sides.
How Do You Install HJC Chin Curtains?
So, here is the process of quick installation. It may be just a work of a few minutes!

Where to Set?
The HJC chin curtain has a plastic rim(edge). This rim will be inserted into the chin area of the helmet. The place is between the helmet shell and EPS chin foam.
Pulling of the Pads
Pull the cheek pads away from the shell. This step is necessary if you want to make the installation easier.
Lining Up
If we pull one side of the chin curtain, there are hang tabs and ridges that generally hold the chin curtains. First, line up the hang tabs. Rotate and line up the centers of the helmet and chin curtain.
Start Placing
Now start from one side. Gently push the plastic rim into the helmet until it is fully seated properly in place. Press your HJC chin curtain until you hear the click sound. Insert the plastic, squeeze it into the side.
Note: Follow all around the edge until you get to the other side. After finishing for one side, do the same for the other part of the helmet.
How to Remove?
To remove the chin curtain, simply rotate and pull out. You will see two hang tabs there. These tabs have to be rotated before pulling up. Otherwise, it will be stuck and will not let you pull.
Motorcycle Helmet Chin Curtain Wind Stopper
Let me tell you when to use the curtain with wind stoppers and what are its exclusive benefits.

Why Will We Need It?
While riding a motorcycle in cool or rainy weather, the hands and chin areas become so cold and start to create pain. To get rid of this pain, bikers must need the type of helmet that can cover the face from the bottom to stop the coldest wind. So, if you use the chin curtain attached with a wind stopper, your neck or chin area can stay warm. Not only that, but a wind stopper will also minimize any wind noise or helmet buffeting.
Other Benefits
A windjammer on a helmet, not a useless material at all. It works well! With the benefit of reducing wind and noise, there will be no problem of misting inside (as there are ways of ventilation). While buying, please check out that it holds silicon materials to provide enough grip to stay at a place.
Besides, with the non-absorbent waterproof ingredients, it defends any single drop of water. Users will not face any trouble while wearing as it fits in seconds (there are soft liners for extra comfort). so, if you are thinking of a chin curtain having a wind stopper, check these upper features and find the best one.
SHOEI RF-1200 Chin Curtain Install
This SHOEI RF-1200 needs just two steps to be installed.

Match the Curtain
Push the breath deflector inside the chin bar. Now the chain curtain will take a little bit of effort to be installed. There is a little arrow that locates the center of the chin curtain. Match that up with the centerline of the chin.
Press and Fit
Push that at the middle, then go to the back of each side. Make sure it is getting a perfect fit. Repeat the process for the other side. Now, grab the helmet, now push the curtain in using your fingers. This step will take some time. Make the curtain tight and well-fitted between the helmet shell. Now it will stay in place.
If I Want to Remove?
To remove it, grab the bottom cloth, hold the plastic tab at the side, gently pull that up by starting from one side and going to the other. Now remove the breath deflector, grab it from one side and fill it gently. Next is the glass shield. Put that shield in the open position, grab the trigger, and then push it forward. Then you will see that the shield is jumping. Grab the shield bottom, rotate it out, repeat it for the other.
FAQ
Q: What does a breath reflector do?
Ans: The actual task of the breath reflector is to deflect the human breath. It fits in the chin curtain and eliminates any fog inside the helmet.
Q: How can I reduce wind noise while traveling with a motorcycle helmet?
Ans: Just make your helmet tight but comfortable, then use a chin curtain with the wind blocker. You can also use helmet earmuffs or earplugs. Earmuffs do a great job to keep ears warm and noise-free. Another task you can do is, keep the visor closed, take a scarf, set it around your neck, and just at the helmet bottom.
Conclusion
Of all the words, the thing to be remembered is, find the middle point of the curtain, merge it with the helmet middle, and squeeze equally on all curtain sides. This one line is enough to make the best installation.
Leave a Reply